Wholesale Tape and Adhesive Removers

C22 Solvent Tape And Adhisive Remover (Walker Tape)

  • Systems: All
  • Base: Oil
  • Gentleness: Skin safe
  • Breakdown Speed: Fast
  • Residue: High
  • Cleanup: Rinse with soap and water
  • Fragrance: Mild citrus
  • Flammable

DIRECTIONS

Saturate adhesive area. Breakdown will begin in seconds. The release time will depend on adhesive buildup. Wipe or brush off residue. Shampoo and rinse.

SOAK OFF DIRECTIONS

Fill large bowl with solvent. Place the unit base side up at bottom of container and let soak. Keep the unit submerged while wearing gloves and working off the adhesive. Shampoo unit and rinse.

CAUTION

Close cap tightly. Do not leave on silicone bases more than 2-3 minutes. Do not apply to broken, cut, or irritated skin. Do not leave on skin for more than 30-45 minutes. Do not breathe fumes. External use only, do not ingest. Avoid eye contact. Keep out of reach of children. Test on a small area before use. Do not store or use near heat, sparks, or open flame. Store at room temperature, below 90°F.

Action Remover Tape And Adhisive Remover (Walker Tape)

  • Systems: All
  • Base: Oil
  • Gentleness: Skin safe
  • Breakdown Speed: Fast
  • Residue: Medium
  • Cleanup: Rinse with soap and water
  • Fragrance: Citrus
  • Flammable

INGREDIENTS

Citrus Oils, Petroleum Hydrocarbons, Lanolin, Fragrance

DIRECTIONS

Saturate adhesive area. Breakdown will begin in seconds. The release time will depend on adhesive buildup. Wipe or brush off residue. Shampoo and rinse.

CAUTION

Close cap tightly. Do not leave on silicone bases more than 2-3 minutes. Do not apply to broken, cut, or irritated skin. Do not leave on skin for more than 30-45 minutes. Do not breathe fumes. External use only, do not ingest. Avoid eye contact. Keep out of reach of children. Test on a small area before use. Do not store or use near heat, sparks, or open flame. Store at room temperature, below 90°F.

Lace Relase Tape Remover (Walker Tape)

Lace Release™

Releases adhesive from mesh, lowering risk of damage to fragile systems.

  • Systems: Mesh
  • Base: Alcohol
  • Gentleness: Skin safe
  • Breakdown speed: Slow
  • Residue: None
  • Cleanup: None
  • Fragrance: Alcohol
  • Flammable

INGREDIENTS 

Medical Grade Dimethylcarbinol, Mineral Oil, Propylene Glycol, FD&C B1

DIRECTIONS 

Apply Lace Release generously through the unit towards the scalp. Wait for 30 seconds. Repeat once more. Gently lift the system away from the head. Shampoo and rinse.

CAUTION

Close cap tightly. Do not apply to broken, cut, or irritated skin. Do not leave on skin for more than 30-45 minutes. Do not breathe fumes. External use only, do not ingest. Avoid eye contact. Keep out of reach of children. Test on a small area before use. Do not store or use near heat, sparks, or open flame. Store at room temperature, below 90°F.

Rapid Release Tape Remover (Walker Tape)

RAPID RELEASE®

Our fastest-acting solvent, ideal for solvent soaks.

  • Systems: All
  • Base: Oil
  • Gentleness: Do not use on skin
  • Breakdown Speed: Fast
  • Residue: Medium
  • Cleanup: Rinse with soap and water
  • Fragrance: Citrus
  • Flammable

INGREDIENTS

Hydrocarbon Solvent, Fragrance

DIRECTIONS

Spray onto adhesive in unit. Do NOT apply directly to skin. Breakdown will begin in seconds. The release time will depend on adhesive buildup. Wipe or brush off residue. Shampoo and rinse.

SOAK OFF DIRECTIONS

Fill large bowl with solvent. Place the unit base side up at bottom of container and let soak. Keep the unit submerged while wearing gloves and working off the adhesive. Shampoo unit and rinse.

CAUTION

Close cap tightly. Do not apply to broken, cut, or irritated skin. Do not leave on skin for more than 30-45 minutes. Do not breathe fumes. External use only, do not ingest. Avoid eye contact. Keep out of reach of children. Test on a small area before use. Do not store or use near heat, sparks, or open flame. Store at room temperature, below 90°F.

S3 Sensitive Skin Solvent (Walker Tape)

S3™ SENSITIVE SKIN SOLVENT

For your sensitive-skin clients.

  • Systems: All
  • Base: Oil
  • Gentleness: Sensitive skin
  • Breakdown Speed: Medium
  • Residue: High
  • Cleanup: Rinse with soap and water
  • Fragrance: Citrus
  • Flammable

INGREDIENTS

Cyclo Alkene, Citrus Oils, Fragrance

DIRECTIONS

Saturate adhesive area. Breakdown will begin in seconds. The release time will depend on adhesive buildup. Wipe or brush off residue. Shampoo and rinse.

CAUTION

Close cap tightly. Do not leave on silicone bases more than 2-3 minutes. Do not apply to broken, cut, or irritated skin. Do not leave on skin for more than 30-45 minutes. Do not breathe fumes. External use only, do not ingest. Avoid eye contact. Keep out of reach of children. Test on a small area before use. Do not store or use near heat, sparks, or open flame. Store at room temperature, below 90°F.

H2 GO Water Based Adhesives (Walker Tape)

H2GO™

The faster, easier way to remove water-based adhesives.

  • Systems: All, only use on water-based glues
  • Base: Water
  • Gentleness: Skin safe
  • Breakdown speed: Fast, relative to competing brands
  • Residue: Low
  • Cleanup: Rinse with soap and water
  • Fragrance: Lemon Candy
  • Nonflammable

INGREDIENTS 

Dihydrogen Monoxide, Surfactant Blend, Lemon Extract Blend

DIRECTIONS

Saturate adhesive area with H2GO, and let sit for 5-10 seconds. As it softens, start removing adhesive. Wipe or brush off residue. Repeat process as needed until skin is clean. Shampoo and rinse.

CAUTION 

Close cap tightly. Do not apply to broken, cut, or irritated skin. Do not leave on skin for more than 30-45 minutes. Do not breathe fumes. External use only, do not ingest. Avoid eye contact. Keep out of reach of children. Test on a small area before use. Store at room temperature, below 90°F.

Isopropyl Alcohol (Walker Tape)

99% Alcohol

Provides light cleanup and removes skin oils, preparing your client’s skin for bonding.

  • Gentleness: Medical grade
  • Base: Alcohol
  • Residue: None
  • Cleanup: None
  • Flammable

INGREDIENTS

Isopropanol

DIRECTIONS 

Saturate sponge brush with solvent. Apply to area you wish to sanitize and wipe clean. This will clean and prepare the area for optimal adhesion.

CAUTION

Close cap tightly. Do not apply to broken, cut, or irritated skin. Do not leave on skin for more than 30-45 minutes. Do not breathe fumes. External use only, do not ingest. Avoid eye contact. Keep out of reach of children. Test on a small area before use. Do not store or use near heat, sparks, or open flame. Store at room temperature, below 90°F.